Mitme auguga metallist kaablitihend
Mitme auguga metallist kaablitihend
Sissejuhatus
Kaablitihendeid kasutatakse peamiselt kaablite kinnitamiseks, kinnitamiseks, kaitsmiseks vee ja tolmu eest. Neid kasutatakse laialdaselt sellistes valdkondades nagu juhtpaneelid, seadmed, tuled, mehaanilised seadmed, rong, mootorid, projektid jne.Pakume teile mitme auguga metallist kaablitihendit, mis on valmistatud nikeldatud messingist (tellimisnr: HSM/nxd), roostevabast terasest (tellimisnr: HSMS/nxd) ja alumiiniumist (tellimisnr: HSMAL/nxd).
Nxd: N tähistab aukude arvu, D tähistab ava läbimõõtu.
| Materjal: | Korpus: nikeldatud messing; tihend: polüamiid; tihend: modifitseeritud kumm |
| Temperatuurivahemik: | Min -40℃,Max 100℃,Lühiajaline 120℃ |
| Kaitseaste: | IP68 sobiva O-rõngaga kindlaksmääratud kinnitusvahemikus |
| Omadused: | Vastupidavus vibratsioonile ja löökidele vastavalt standardile IEC-60077-1999. |
| Rakendused: | Masinaehitus, elektriseadmed, elektriline juhtimiskapp |
| Sertifikaadid: | CE |
Spetsifikatsioon
(Kui vajate muid suurusi, mis ei ole järgmises loendis, võtke meiega ühendust lisateabe saamiseks.)
[Meetriline/Pg/Npt/G keerme on saadaval.]
| Nikkeldatud messingist kaabli tihend (meetriline keerme) | |||||||
| Artikli nr. | Niit | Ava suurus | AG | GL | H | SW1/SW2 | pakett |
|
| Mõõtmed | mm | mm | mm | mm | mm | ühikut |
| HSM-M16/4×1,4 | M16 × 1,5 | 4 × 1,4 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16/2×3 | M16 × 1,5 | 2 × 3 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M18/2×3 | M18 × 1,5 | 2 × 3 | 18 | 7 | 21 | 17/20 | 32 |
| HSM-M18/4×3 | M18 × 1,5 | 4 × 3 | 18 | 7 | 22.5 | 20/20 | 32 |
| HSM-M18/2×4,5 | M18 × 1,5 | 2 × 4,5 | 18 | 7 | 22.5 | 20/20 | 32 |
| HSM-M20/3×2,5 | M20 × 1,5 | 3 × 2,5 | 20 | 7 | 23 | 20/22 | 32 |
| HSM-M20/6×3 | M20 × 1,5 | 6 × 3 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20/3×4 | M20 × 1,5 | 3 × 4 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20/2×5 | M20 × 1,5 | 2 × 5 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M25/4×6 | M25 × 1,5 | 4 × 6 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M25/3×7 | M25 × 1,5 | 3 × 7 | 25 | 7 | 26 | 28/30 | 18 |
| HSM-M25/2×8 | M25 × 1,5 | 2 × 8 | 25 | 7 | 26 | 28/30 | 18 |
| HSM-M32/6×6,5 | M32 × 1,5 | 6 × 6,5 | 32 | 8 | 33 | 40/40 | 8 |
| HSM-M32/4×9 | M32 × 1,5 | 4×9 | 32 | 8 | 33 | 40/40 | 8 |
| HSM-M40/5×9 | M40 × 1,5 | 5×9 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-M40/7×9 | M40 × 1,5 | 7 × 9 | 40 | 9 | 38.5 | 50/50 | 4 |
| *HSM-M40/6×8 | M40 × 1,5 | 6 × 8 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-M40/2×15 | M40 × 1,5 | 2×15 | 40 | 9 | 38.5 | 50/50 | 4 |
| *HSM-M63/8×10 | M63 × 1,5 | 8×10 | 63 | 10 | 41 | 58/70 | 2 |
| HSM-M63/6×12 | M63 × 1,5 | 6 × 12 | 63 | 10 | 41 | 58/70 | 2 |
| HSM-M63/4×19 | M63 × 1,5 | 4 × 19 | 63 | 10 | 44.5 | 75/75 | 2 |
|
|
|
|
|
|
|
|
|
| Nikkeldatud messingist kaabli tihend (PG keermega) | |||||||
| Artikli nr. | Niit | Ava suurus | AG | GL | H | SW1/SW2 | pakett |
|
| Mõõtmed | mm | mm | mm | mm | mm | ühikut |
| *HSM-P09/4×1,4 | PG9 | 4 × 1,4 | 15.2 | 7 | 22 | 17/17 | 75 |
| HSM-P09/2×3 | PG9 | 2 × 3 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-P11/2×3 | PG11 | 2 × 3 | 18.6 | 7 | 21 | 17/20 | 32 |
| *HSM-P11/2×4,5 | PG11 | 2 × 4,5 | 18.6 | 7 | 22.5 | 20/22 | 32 |
| *HSM-P13.5/3×2 | PG13.5 | 3 × 2 | 20.4 | 7 | 23 | 22/22 | 32 |
| HSM-P13.5/6×3 | PG13.5 | 6 × 3 | 20.4 | 7 | 24 | 22/22 | 32 |
| HSM-P13.5/3×4 | PG13.5 | 3 × 4 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| *HSM-P16/3×3 | PG16 | 3 × 3 | 22.5 | 7 | 23 | 22/24 | 32 |
| * HSM-P16/3×4 | PG16 | 3 × 4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/4 × 4 | PG16 | 4 × 4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/5×4 | PG16 | 5 × 4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/6×4 | PG16 | 6 × 4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/2×6 | PG16 | 2 × 6 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21/4×6 | PG21 | 4 × 6 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P21/3×7 | PG21 | 3 × 7 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P21/2×8 | PG21 | 2 × 8 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29/6×6,5 | PG29 | 6 × 6,5 | 37 | 8 | 33 | 36/40 | 8 |
| HSM-P29/4×9 | PG29 | 4×9 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-P36/5×9 | PG36 | 5×9 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P36/7×9 | PG36 | 7 × 9 | 47 | 9 | 38.5 | 50/50 | 4 |
| *HSM-P36/6×8 | PG36 | 6 × 8 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P36/2×15 | PG36 | 2×15 | 47 | 9 | 38.5 | 50/50 | 4 |
| *HSM-P48/8×10 | PG48 | 8×10 | 59.3 | 10 | 41.5 | 58/65 | 2 |
| HSM-P48/6×12 | PG48 | 6 × 12 | 59.3 | 10 | 41.5 | 65/65 | 2 |
| HSM-P48/3×18 | PG48 | 3×18 | 59.3 | 10 | 41.5 | 65/65 | 2 |
